Friday, September 2, 2011
The Evolution of a 21st Century Educator -- post #37
Friday, August 5, 2011
How Smarter Science Changed my Teaching Life OR How I got My Students to Stop Regurgitating and Start Thinking Like Scientists
Sunday, March 13, 2011
Special Education High School Students Plan their Own Science Investigation – Post 23
In order to facilitate their investigation I provided them with a photocopied set of the Smarter Science framework Steps to Inquiry (set one) worksheets and I had enlarged posters of the framework on the front board for them to refer to. We used the set one framework because it is designed for use with beginning, exploring and emerging scientists.
Step 1: Observing and Questioning (=ENGAGE)
On day one I provided each student with a freshly cut wedge of lemon and told them that I had read on the internet that lemons could be used as a safe and effective cleaning product yet I was skeptical and not everything that one read on the internet was true. I asked them if any of them had ever heard this or tried to clean using lemons. Since none of them had I invited them all too simply take a slice of lemon and attempt to clean an area of the lab countertops. No further instruction was given and each student was left to their own interpretation of this instruction. After they had all m
ade whatever attempt they chose to clean the lab counter with a lemon wedge they were asked to discard the lemon and wash their hands.
Then we went to page one of the Smarter Science framework worksheets to record what we had observed while cleaning with a lemon wedge. The following observations were shared and recorded:
· Smelled lemony
· Wet
· Not a good cleaner
· Worked better if area was rubbed with a paper towel after
· Lemon got dirty
· You needed to rub hard
· It sounded like scrubbing
· Sticky residue remained on the counter tops
Our next step was to think about using lemons as cleaners. Using the key word “wonder” I prompted the students to think about what they were wondering about as a result of their experience using lemons as cleaners. (Note: Half an hour ago none of these students had any prior knowledge of lemons as cleaners but now they had their own personal exper
ience to draw on.) After some initial hesitancy the list of questions the students came up was phenomenal! Each question was recorded, in abbreviated form, on sticky notes by the students while I modeled this behavior for them at the front of the room. (Although the students were invited to record their questions in pictorial form none did, but some required the aid of their scribes.) In no particular order, these are the questions the students wondered abou
t:
Can lemon juice remove paint?
Do people like squeezing lemons?
Does lemon collect bacteria?
Does lemon juice fade freckles?
Does lemon juice cause rust?
Can lemon juice be used to clean a car?
Can lemon juice be used as wiper fluid?
Is lemon juice expensive?
Does lemon juice remove make up?
Can lemon juice get rid of wrinkles?
Will sunlight change the properties of lemon juice?
Can other types of fruits be used as cleaners?
The following day we started with this list of twelve questions that the students had generated. We needed to sort them into three categories: those that could be answered by research, those that could be answered by laboratory testing, and those that would remain speculative. In order to aid with the sorting process I had prepared a “Question Sorter Template” for the students use and also put a copy of the template on the board so I could model for them what we were doing and they could all engage fully. Each question was discussed at length before being placed in the appropriate column of the question sorter template. The students realized that some questions did not fit neatly into one particular category so these sticky notes were placed on the line between categories. (These students’ excel at oral communication so I use every possible occasion to encourage them to share their thoughts aloud. Interestingly, they are especially patient and respectful with the one student who is often tongue tied and requires extra time to process his thoughts and form his words. )
LAPTOP TIME!
Can you believe that I actually have a class set of laptops that not only work but are connected wirelessly to the internet! Wow! I can barely believe in myself but I am thrilled to report that my school board (Ottawa Catholic) has fully embraced 21st century technology in the classroom. Even better these high need students, who have difficulty remembering usernames and passwords, have been taught to have this information, in writing, available to them at all times.
So we logged on and each student got to work researching the answers to our questions. Many interesting and informative answers were found and discussed during this process. At the end of our research process the question that was the most poorly answered, on the internet, was “Will bacteria collect on lemons?” Therefore this became our lab investigation question.
Personally, I was uncomfortable with the wording of this question and prompted the class several times to reconsider what the question said, what they wanted it to say and if a different choice of words would be better but they were adamant that they liked it the way it was so I left it alone. This was their investigation, not mine. Did I want to empower them of dictate to them? Sometimes it is hard to let go!
Step 2 (a) What could we measure or observe about the object, or event?
“Will bacteria collect on lemons?”
Step 2 (b) What could we change or vary about the object or the event that may affect what we could measure or observe?” = variables
We brainstormed and recorded the following variables on sticky notes which were placed on page two of our framework handout:
· Temperature
· Time
· Adding water
· How many lemons
· Where to get some bacteria
· Size of lemon
· Weight of lemons
· Size of jar / beaker
· Where to put them
Step 3 (a) What will we change? (= changed variable)
This step required extensive discussion, debate and time. It could not be rushed or some students would not understand how this was a controlled experiment. Everyone had several opportunities to voice their ideas and opinions. Elimination votes were taken to narrow down the options. Final answer:
The one variable we will change is where we place the jar with the lemon in it and we will measure or observe how much bacteria will grow.
What this meant to our class is that each pair of students would run an identical lab but each group would get to decide the location of their test lemon, in the beaker.
Step 3 (b) What will we not change? (=unchanged variable)
Now we moved the rest of our sticky notes from step 2 (b) over to page 3 of our framework template and decided on what value to give them.
· Temperature = room temperature
· Time = check every day until we decide to stop
· Adding water = no
· How many lemons = one half, cut width ways
· Where to get some bacteria = one cough per group member onto cut lemon in the beaker
· Size of lemon = medium
· Weight of lemons = use an balance and record
· Size of jar / beaker = 1000 mL glass beaker, no lid or cover
Step 4: What is the question we want to explore?
All we had to do now was simply move some sticky notes to page 4 of our template so our question looked like:
“If we change “where we put the beaker” (changed variable) what will happen to “the amount of bacteria on the lemon” (to b e observed daily) compared to our control?”
Step 5: What is our prediction? State how we will change the variable and predict the outcome?
This was my teachable moment to do some just-in-time teaching about using “If . . .then” statements to make predictions. Each student was guided through the process and wrote their own predictions. In several cases they expressed what they wanted their prediction to say and were then helped to form it into an “if . . .then” statement. There was no student who did not have an idea about what they wanted to predict. The students required a lot of reassurance that no prediction was wrong, it was important to make a prediction using the correct format. The only wrong answer was not to make a prediction. Some students found it very difficult to commit to a prediction yet eventually they all did! In general they looked like:
We predict that . . . if lemons are placed in different locations then they will collect different amounts of bacteria.
We think this will happen because . . . (another difficult sentence starter yet everyone managed to write something eventually.)
2. Perform and Record (=EXPLORE)
All the events written about above fell under the “initiate and plan” (a.k.a engage) stage of setting up the experiment and took our class a full week of 75 minute classes to complete. Yet, as an experienced educator, I believe it was time well spent because the students were engaged in authentic, real life learning, they were being empowered to take ownership of their experimental set up and design and they were working collaboratively throughout.
Because we had determined the values for all of our variables during the design process it was relatively simple to set up the experiment. The students knew exactly what to do because this was their lab and they had invested a great deal of thought and discussion into each step.
Observations: Drawing tables in an extremely challenging task for this group of students. Even when I provide them with a ruler drawing straight lines defies some of their fine motor skills. So, today, I decided to try something different. I hooked my laptop up to the LCD projector and opened word processing software. I brought my printer over to my desk and plugged it into my computer. After typing the heading “Observation Table”, I announced, “Let’s design our observation table together.”
Step by step I showed the class how to set up a table and type in the headings. This information meant nothing to many of the students, but was helpful to a few. We made a three-column table with the heading: Date, day, and observations. Everyone got out a calendar while I explained that if Friday was day 3 then Monday was day 6, not day 4! This concept is challenging to lots of my students but for a student whose exceptionalities includes that they have no understanding of the concept of time it is particularity impossible.
Once we were all satisfied with the design, layout and spacing of the observation table I printed one out for each student and they were delighted! Now all we have to do is make our observations each day. Eventually we will stop the experiment and move onto analyzing, interpreting and communicating our answers. You will be able to read about that in 4 – 6 weeks from now. In the meanwhile, I am content to know that this special education class is learning to think like real scientists!
Friday, February 4, 2011
Testing the Absorbency of Paper Towels and the Sham-wowTM! -- Part Three
(Posting 18)
Okay! So my grade nine / ten Essentials Grade Nine Science class has spent two days preparing to conduct an experiment to determine which type of towel is the most absorbent. The three types they have to choose from are brown paper towels like those found in school washrooms, white paper towels common in most North American kitchens and the Sham-wowTM a commercial product advertised for its absorbency. I spent the first day getting them engaged in the concept of the inquiry that we would be performing (see blog posting 16). Then we spent the next day using the Smarter Science elementary framework to plan our controlled test of the three paper towels (see blog posting 17).
You may be thinking that this is way too much time to invest in a science experiment, there is curriculum to cover, facts to memorize, textbooks to read and tests to write! I would like to counter any of these arguments with the reply that I have been using the Smarter Science framework in my classroom for some time now with the result that the students have an enduring understanding of the process of science and they have become able to think critically about a wide variety of concepts, not limited to science. As a veteran teacher I have often struggled with the question “But how do I get them to think?” I have read a plethora of books, taken too many courses, sat through endless hours of professional development and tried countless strategies to develop students’ metacognitive skills but it was not until I started using the Smarter Science framework in my classroom that I felt that the students were actually developing their metacognition.
The posters we used are available in pdf format on the Smarter Science website. Because my students have weak literacy skills I chose to complete one master set for this experiment which I had prominently displayed in my classroom. As the students entered my classroom today I met them at the classroom door and gave them a photocopy of the bottom half of page 4 as they entered with the instructions that the only other item they needed today was a pencil.
Together we reviewed the process we had gone through yesterday wherein we had ended by determining the question we wanted to explore. The question is: “If we change the type of towel what will happen to how long it takes to clean up (time)?”
The students were instructed to complete the handout I had given them of step five individually. This included changing the words “We” to “I”. Every single student completed the first half with: “I predict that the Sham-wowTM will be the best.”
They struggled a lot more with the second sentence starter, “I think this will happen because . . .” They wanted me to tell them what to write. Again I had to convince them that it was what they think, not what I think, as long as that is what they think then their answers will be right. There was a huge tendency to copy from the few risk takers who took the chance to fill in their thoughts so I had to ask them to turn their papers over when they were done. An additional problem I encountered was that due to the weak literacy level in the class some students asked me how to spell particular words, which is a practice I encourage with these learners. However, what happened today was when others heard what words were being requested they used those words in their answers. Thinking is a real challenge but one I now feel competent to deal with!
Eventually everyone had something written down. Some examples of their answers included, “I think this will happen because . . .
· the Sham-wowTM is made of fabric.”
· it is better.”
· material is good.”
· it is expensive.”
We referred back to poster3, step 3(b) on which we had written our three unchanged variables: blotting or rubbing, amount of water spilled, and amount of time spent cleaning up. Collaboratively we decided on the values to give each of these variables. They were:
· Blotting only, no rubbing
· Amount of water spilled = 25 mL
· Size of towel = 10 cm x 10 cm
I wrote these values right onto the poster for the students to refer to.
Almost ready to perform and record! We decided the instruments we would use would be the 25 mL graduated cylinder for the amount of water spilled. Consequently, we had some “just in time” teaching while I demonstrated how to use the graduated cylinders. We also decided to use pencils and rulers to measure out 10 cm x 10 cm squares of each towel and scissors to cut
Next we designed our observation table onto which we would record our data. We drew them right on the back of the small handout the students had used to make their predictions.
| Type of towel | Volume of spill | Size of towel | Time to clean up |
| Brown paper | 25 mL | 10 cm x 10 cm |
|
| White paper | 25 mL | 10 cm x 10 cm |
|
| Sham-wowTM | 25 mL | 10 cm x 10 cm |
|
I did not worry about the fact that they were only going to do one trial with each type of towel. We can only cover so much ground at once! We can get into multiple trials and reproducibility another time.
Measuring out a 10 cm x 10 cm square onto the towels was very challenging for some of these students, as was cutting the squares out. After helping all of them cut one square out I showed them how to use it as a template for the next towel rather than measuring a new square out. In the future I may prepare some cardboard templates for the students who struggle with their fine motor skills. It would also be an opportunity to have a peer helper or buddy come into the classroom to help measure and cut the squares.
The students were happy to be measuring out their squares and using the graduated cylinders. I was pleased when one asked me if they should put their goggles on. I told them it was okay because we were only using water so they would be safe but they were disappointed so I got the goggles out and made them optional for this lab. About half of the students put them on, I have observed time and again that students like to be “real” scientists and do what a “real’ scientist would do.
The students were even more delighted that they were allowed to “spill” water onto the lab counter. As they performed the lab they required verbal cues to remind them to “blot not rub” and “don’t start blotting until you look at the clock”. In order to facilitate timing I had the students work in pairs, but each person performed the entire lab. This allowed them to focus on either timing or blotting at one time instead of both thereby ensuring that data got collected and recorded.
By the time everyone had performed the inquiry, recorded their data and cleaned up I had them all pass in their little handout for marking. There was much more learning than what was recorded on that paper but it allowed me, as a classroom teacher, to have some evidence of the students’ accomplishments so I could record something in my mark book.
There are so many extensions that could be done with this inquiry we could probably do nothing but this for the entire semester. Here are some questions that the students had while doing the inquiry:
· I wonder if the Sham-wowTM works as well after it has been washed.
· I wonder if the blue Sham-wowTM works as well as the orange sham-wows.
· I wonder how the no-name Sham-wowTM from the Dollar Store compares.
· I wonder why they don’t put Sham-wowTM in all the washrooms.
· I wonder why they don’t make diapers out of the Sham-wowTM?
· I wonder how the Sham-wowTM compares to an ordinary towel.
· I wonder if I could use the Sham-wowTM to dry my dog.
It is these questions that provide evidence to me that the students are engaging their metacognitive skills, and that is the power of Smarter Science!
Thursday, February 3, 2011
Testing the Absorbency of Paper Towels and the Sham-wowTM!
(Posting 17)
If you read my previous blog posting you know that I spent a considerable amount of time laying the ground work for today’s inquiry. The students I teach in this class are teenagers yet they all have high needs and a multitude of exceptionalities which results in them working well below grade level.
Today, when the students came to class I greeted them at the door, as usual. On my desk I had the same three items as yesterday – a roll of brown paper towels, a roll of white paper towels and an orange Sham-wowTM , however, there was no spilled water on the front counter. Taped up on the front board I had the set of four Smarter Science posters that are recommended for use at the elementary level.
We quickly recapped yesterday’s lesson wherein we had observed spilled water and discussed which type of towel would clean it up the best.
“What happened to the spill, Miss?”
“Which towel did you use to clean it up?”
Imagine the students surprise when I told them that I did not clean it up! Instead I left it there when I went home yesterday and when I came back today it was gone.
“The custodian must have cleaned it up” quickly became the class consensus. I asked if anyone had any other ideas of where it might have gone. Sadly, they didn’t so it was up to me to suggest that it might have evaporated. This led to a lengthy discussion about evaporation. The example that most students seemed to be able to relate to was puddles disappearing when the sun comes out. Although they all came around to accepting that evaporation is real there remained a great deal of uncertainty about how long the process would take.
“Let‘s talk about the observations we made today and yesterday” I said as I drew the students’ attention to the first poster at the front of the room. Step One, collectively we came up with three observations:
- Miss spilled water yesterday.
- Miss has towels that could clean up the spill.
- Where did the spilled water go?
“Looking at these three observations, what does it make you wonder?” (Still step one of the Smarter Science framework.)
- Was it really water?
- Why did she spill it?
- How much water did she spill?
- Who cleaned it up?
- Which towel works better?
Although the students had deviated from the intention of the “WONDER” box I did not correct them since they were completely engaged, on track and offering excellent questions. (The “wonder” box is intended to be used for the students to speculate as to the answers they posed in the “observe” box.)
Moving on to step 2(a) of the Smarter Science framework, on the second poster, we worked together as a class to brainstorm the answer to “What could we measure or observe about the spilled water?” We recorded our ideas on pink sticky notes.
- How much water was spilled? (initial volume)
- How long does it take to clean up? (time)
- How much water gets soaked up by the towels? (final volume)
- How big is each type of towel? (size)
These questions lead us directly to step 2(b): “What could we change or vary about the object or the event that may affect what we could measure or observe?” These items were listed on yellow sticky notes.
· Amount of time spent cleaning up
· Blotting or rubbing with the towel
· Size of the towel
· Type of towel
· Amount of water spilled
All of the ideas listed above came directly from the students. A different group of students may come up with a completely different list. That does not mean one list is better than the other. As long as they stay on task any list is correct. The students need to receive continuous positive verbal feedback and reassurance that there is no such thing as a stupid idea in science class. In fact, some of the best discoveries in science have come from what others considered “stupid ideas”. One of my own personal favourites that I use to describe this phenomenon is that of Galileo Galilei, but I digress. 

Moving onto poster three, step 3(a) we had to decide what we would change. This choice was limited by the yellow sticky notes we had placed in the box for step 2(b). It was decided that our changed variable would be the type of towel used. This decision was prompted by reminding the students that what we wanted to test, today, was which type of towel was the most absorbent. Consequently, the yellow sticky note reading “type of towel” was placed on the “changed variable box” of step 3 (a).
Our next decision was how we would measure of observe the result. This process was starting to go over the heads of some of the students plus their attention was starting to lag but when I told them that this was really a multiple choice question and all they had to do was choose one of the pink sticky notes from step 2(a) for us to put there they perked back up. The choices we had previously recorded on pick sticky notes in step 2(a) were:
- How much water was spilled? (initial volume)
- How long does it take to clean up? (time)
- How much water gets soaked up by the towels? (final volume)
- How big is each type of towel? (size)
We voted to determine that the quantity we would measure would be time and we would use the second hand on the classroom clock to measure it. So the pink sticky note that read “How long does it take to clean up? (Time)” was moved to the appropriate box on poster three.
Step 3(b) on poster three asks “What will we not change?” so the remaining yellow sticky notes were moved here.
Moving on to poster four all we had to do was move the pink and yellow sticky note from poster three, step 3 (a) onto step 4. Therefore it read, “If we change the type of towel what will happen to how long it takes to clean up (time)?”
Eureka! We have successfully initiated and planned a controlled experiment! But . . .we are out of time.
The students are told that tomorrow they will start by making their predictions and then we will be able to get on to the actual experiment!
“Yay! Another day with no work! We love science!”
See the next blog posting : Testing the Absorbency of Paper Towels and the Sham-wowTM!
Part Three – Using the Smarter Science Framework to Perform, Record, Analyze and Interpret the Inquiry (Posting 18)